Latest Post

Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camer
Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camera 

Visit the store

Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camera 3-axis Gimbal RC Drone Quadcopter RTF 33mins Flight 3800mAh Battery Online - White EU Plug, 1 Battery without Storage Bag


Visit the store

Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camera
Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camera 

Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camera
Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps UHD Camera 

Enjoy Your Flight Right Now!

The remote control distance of Hubsan Zino 2 has been upgraded from 2.5km to 6km, which allowing you to take photos of further scenery and places. The camera is upgraded from 4k-30fps to 4k-60fps, and the images taken are more clear and exquisite. Larger lens size for better low-light effect. In addition, it also has a remote control with digital display which has a high brightness scree to allow you to track the flight data in real time and you can clearly see it under the strong light outdoors, so as to better enhance the user experience. The flight endurance of Hubsan Zino 2 can max. up to 33 minutes (in a windless environment), so that you to fully enjoy your flight in one go.

Hubsan Zino 2 Main Features:

● 6km upgraded remote control distance, the image transmission distance is even more distant
● 4K-60fps camera, support RAW format, photo lossless output and time-lapse shooting
● 1/2.3 inch CMOS larger lens size, better low light effect
● Remote controller with digital display, visible in strong lights
● The flight endurance up to 33 minutes (windless); Accurate battery power monitoring
● Update the latest firmware of aircraft and remote control online through App
● Negative film are downloaded directly via a wireless link
● The gimbal is detachable
● Support using the transmitter to control the drone DIRECTLY

Hubsan Zino 2 Specifications:

● Maximum take-off altitude: 5000m
● The longest flight time: 33mins (windless)
● The longest hover time: 32mins (windless)
● Max. endurance mileage: 20km (50km/h windless cruising)
● Wind resistance: 5-level
● Max. Tiltable angle: 25 degrees (normal mode); 35 degrees (sports mode)
● Max. rotational speed: 150 degrees/s
● Working temperature: -10 Deg.C - 40 Deg.C
● Working frequency: 5.725 - 5.850 GHz
● Positioning: GPS + GLONASS

Pan-Tilt Specifications of Hubsan Zino 2:

● Structural design range: pitch: -135 degrees to 45 degrees; roll: -40degrees to 40 degrees; Shift: -35 degrees to 35 degrees
● Controllable rotation range: pitch -90degrees to 0 degrees
● Stability system: 3-axis gimbal
● Maximum control speed (pitch): 100°/s
● Angle jitter: ±0.01°

Camera Specifications of Hubsan Zino 2:

● Image sensor: 1/2.3 inch CMOS sensor
● View angle: 80°
● Equivalent focal length: 24-48mm
● Aperture: f/2.2
● ISO range: photography: 100-1600 (automatic); 100-3200 (manual) Video: 100-3200 (automatic); 100-3200 (manual)
● Shutter speed: 1/8000 - 1/30
● Image pixel: 12M
● Compress resolution: 4K: 3840*2160 30/60fps / 2.7K: 2704*1520 30/60fps / 1080P: 1920*1080  30/60/120fps / 720P: 1280*720 30/60/120/200fps
● Video maximum bitrate: 100Mbps
● Support file system: FAT32
● Image format: JPEG/DNG (RAW)
● Video format: MP4 / MOV (h.264 / mpeg-4 AVC)

Battery Specifications of Hubsan Zino 2:

● Capacity: 3800 mAh
● Nominal voltage: 17.4V (4S)
● Charging limit voltage: 17.6V
● Battery type: intelligent lithium battery, accurate calculation of battery power, ensure the safety of battery life
● Energy: 66.12Wh
● Weight: 310 g
● Charging environment temperature: -10 Deg.C- 40 Deg.C
● Maximum charging power: 52.2W

Image Transmission Specifications of Hubsan Zino 2:

● Scheme: LEAS 2.0
● Distance: 6km
● Transmission power (EIRP): <=26dbm
● Band: 5.725-5.850 GHz

Charger Specifications of Hubsan Zino 2:

● Input voltage: 100V-240V
● Input current: 2A
● Output voltage: 17.1V-18.9V
● Output current: 0.0- 3.33A
● Rated output power: 54W

Remote Control Specifications of Hubsan Zino 2:

● Operating frequency: 5.725-5.850 GHz
● Maximum effective signal distance: 6km (no interference, no obstacle)
● Operating environment temperature: -10 Deg.C- 40 Deg.C
● Built-in battery: 3350mAh
● Working current/voltage: 3.7V, 1400mA (connecting the android devices); 750mA 3.7V (connecting the iOS devices)
● Support mobile device size: maximum length: 160mm; thickness: 6.5 - 8.5mm
● Interfaces type: Lightning / Micro USB / Type-C
● Charging: Micro USB
Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps
Hubsan Zino 2 LEAS 2.0 GPS 6KM FPV with 4K 60fps

Gearbest Udyr Qi 10W Fast Wireless-Charger USB LED Indicator For iPhone X Max Samsung Galaxy S9 Charging Pad - Black Universal
Visit the store


Udyr Qi 10W Fast Wireless-Charger USB LED Indicator For iPhone X Max Samsung Galaxy S9 Charging Pad 


Gearbest Udyr Qi 10W Fast Wireless-Charger, USB LED Indicator, For iPhone X Max, Samsung Galaxy S9, Charging Pad - Black Universal,
Gearbest Udyr Qi 10W Fast Wireless-Charger USB LED Indicator For iPhone X Max Samsung Galaxy S9 

Visit the store

Specification
Classification
Wireless Chargers
Output Interface
USB
Connection Type
Mini USB
Package Contents
3
Input
9V/2A
Brands
udyr
Output
5V/2A
USB Ports
1
Package Sizes
3
Product Weights
60g
Package Weights
3


Gearbest Xiaomi Mijia MJYD01YL Sensor Night Light - White

Visit the store



Xiaomi Mijia MJYD01YL Sensor Night Light - White


Description:
Using Mijia Sensor Night Light to give you a dream night lamp in your home. Features high-sensitive human induction which can turn on/off automatically, normal socket never required, and you have many ways to hang or stick our smart light immediately. The bright but soft visual effect in the dark, lower consumption to save your electricity, it is a truly nice company for you and your loved ones at every moment!

Main Features:
Extraordinary sensing function, 120-degree sensing angle and sensing distance are 5 to 7 meters. The light can turn on automatically when people approach in the dark environment, and light for 15 seconds
No need for socket , free you from wired trouble, and can be easily stuck to the wall with 3M glue, or just hang on the shelf
Extremely low power consumption, powered by 3 x AA battery ( not included ), can be used up to 1 year or 0.5 years in two different modes, also cut your electricity bills efficiently
Safe environmental material, selecting environmental-friendly ABS material and high-density polyethylene material
Wide application, can be placed in everywhere: bedside, stairs, bookcase, etc.

Visit the store


Gearbest Mecool M8S PRO W 2.4G with Andriod OS Support TV Box - Black UK Plug

Mecool M8S PRO W 2.4G with Andriod OS Support TV Box



Mecool M8S PRO W TV Box
Mecool M8S PRO W adopts 2017 new high cost-effective chip Amlogic S905W, comes with quad-core Cortex-A53 CPU up to 2GHz and Mali-450 GPU. High performance, high integration, low power consumption. It runs on the Android 7.1, which has good performance. You can connect to a world of content and entertainment at home. Smoothly watching TV shows, movies, browsing webpage and photos, and playing Android games with your family and friends. It is the best choice for you to have the smooth experience to watch the video or play games.

Main Features:
● A full-4K high-performance SoC that supports H.265 video decoding up to 4K at 30fps
● 2GB DDR3 + 16GB eMMC, support up to 32GB of expandable storage, you can download whatever you like, keep them and enjoy them
● It runs on the Android 7.1, which is good to use. You can connect to a world of content and entertainment at home with the box
● A high performance of quad-core Cortex-A53 CPU can play a wide range of games
● Built-in 2.4G WiFi. Support IEEE 802.11 b/g/n. A more stable signal for you to enjoy higher quality video experience
● HDMI 2.0 is a faster way to send video and audio output to your TV
● YouTube, Netflix, HBO, Twitter. These network functions are no problems if you have this product
● Support Miracast / Airplay, share your video to your TV
● The remote control is powered by 2 x AAA battery ( not included )

NOTE
Random delivery Amlogic S905W and Amlogic S905X chips


Gearbest W31 2 Output 10W Fast Charge Wireless Charger

Visit the store



W31 2 Output 10W Fast Charge Wireless Charger only $17.97

Main Features:
● Only for phones that support wireless charging
● Quick charging, get rid of the shackles of the charging line
● Input: 5V / 3A, 9V / 2A
● Output 1: 5V / 1A, 9V / 1.1A ( 10W max )
● Output 2: 5V / 1A, 9V / 1.1A ( 10W max )
● Transmission distance: 8mm
● Charging efficiency: 70 percent
● Executive standard QI wireless charging alliance standard

Visit the store

Specification

General
Model: W31
Type: Wireless Chargers
W31 2 Output 10W Fast Charge Wireless Charger - White
W31 2 Output 10W Fast Charge Wireless Charger - White


Gearbest Bilikay Ultrasonic Smart Washing Machine with EU Adapter


Visit the store



Bilikay Ultrasonic Smart Washing Machine with EU Adapter only $49.99

Main Features:
● Ultrasonic high-frequency vibration cleaning principle
● Using the cavitation effect of 60000Hz high-frequency vibrating liquid, tiny bubbles are formed in the liquid and burst, and the impact force causes the stain to be dispersed, emulsified and peeled off, thereby achieving disinfection, sterilization and cleaning
● Automatically laundry in the water, release your hands, save trouble and effort
● Small size, easy to carry, travel without worry
● Full touch screen control, you can select the cleaning time with one touch, for a variety of cleaning scenes
● It can also clean pesticide residues and bacteria on fruits and vegetables, and clean a variety of harmful substances in 3-5 minutes
● It can also clean all washable items such as seafood, tableware, glasses, jewelry, etc.

Visit the store

Specification

General
Material: ABS,Metal
Wire Type: Cordless
Basic Informations
Voltage (V): 110V
Power (W): 70W
Bilikay Ultrasonic Smart Washing Machine with EU Adapter only $49.99
Bilikay Ultrasonic Smart Washing Machine with EU Adapter only $49.99

Alfawise Z1 Pro 3D Hologram Advertising Display Fan Projection Lamp only $139.99

Alfawise Z1 Pro 3D Hologram Advertising Display Fan uses the principle of visual (POV) persistence to display images or videos. It will make your logo, slogan, product or ad the most eye-catching among all the ordinary print advertisements.

Main Features:
● Use POV display technology, display no-border 3D effect, your ad will float in the air
1200 round per minute high speed, provides true-to-life image and dynamic effects
● Equipped with 384 LED beads, 70% more than others, more precise and brighter
1080 x 384 high resolution HD display
WiFi wireless picture transfer with APP ( scan the QR code on the user manual to install the APP )
● Built-in SD card slot
● Turn on / off the fan with the remote control or smartphone, safer operation
Provide custom picture and video service

Visit the store

Specification

General
Brand: Alfawise
Model: Z1 Pro
Sheathing Material: ABS,PMMA
Output Power: 25W
Voltage (V): AC 100-240V
Battery: CR2032
Luminous Flux: no
Color Temperature or Wavelength: no
Lifespan: 50000HZ
Features: APP Control,Easy to use,Energy Saving,Long Life Expectancy,Remote Control,Timer,WiFi
Function: Commercial Lighting,For Office and Teaching,Home Lighting,Studio and Exhibition Lighting
Available Light Color: 7 Colors
Body Color: Black


Gearbest QIDI TECH LCD New Model Shadow 5.5 3D Printer


Visit the store


QIDI TECH LCD 3D Printer Shadow 5.5 S UV LCD Resin Printer with Dual z axis Liner Rail 

Germany

QIDI TECH LCD New Model Shadow 5.5 3D Printer only $459.00

Main Features
1.QIDI Technology's latest LCD resin 3d printer, comprehensive leading industrial design, precision manufacturing.
2.Double Z-axis linear guide design ensures stable printing process and accurate printing results.
3.Shadow 5.5S is equipped with high-quality 2K lcd screen, which achieves fast curing through matrix ultraviolet light, improves printing accuracy, and thus makes printing result better.
4.Shadow 5.5S is the 2020 new model, upgraded air filtration system, each set of Shadow 5.5 S is equipped with friendly resin, no irritating smell.
5.QIDI TECH Professional after-service team,if you have any problem about our 3d printer,we will reply to you within 24 hours.Free one-year warranty (the 2K LCD and FEP film are excluded).

Visit the store

Specification
Package Size(L x W x H)
31*29*61CM
Package Weights
9.8
Package Contents
Shadow-5.5S 3D printer X 1,Print Platform X 1,USB Pen Drive X 1,Resin vat X 1,250g Resin X 1,Gloves Pairs X 3,Funnel X 5,User Manual X 1,Tool kit X 1,Extra FEP film X 1,Power adaptor/Power cord X 1,Mask X 1,Scraper X 1,Screw driver X 1

Gearbest Ortur4 V2 Linear Guide Rail High Speed High Accuracy Solid Heavy Duty Business 3D Printer Machine - Ortur4 V2 10M PLA China

Visit the store


Ortur4 V2 Linear Guide Rail High Speed High Accuracy Solid Heavy Duty Business 3D Printer Machine - Ortur4 V2 10M PLA China only $437.00


Main Features
Features:
1. Solid Heavy Duty FDM 3D Printer, with All Metal One-piece Structure
2. Linear Guide Rails for All X Y Z axes, Much faster & More Precise than Standard Cartesian FDM 3D Printers.
3. Upgraded Print Head, Easy to Maintain or Change the Spare Parts.
4. Thermistor and Heating Element are Securely Screwed in.
5. Large Cooling Fan Cools the Control Board
6. Glossy Hotbed Cover, Very Easy for PLA to Stick on or Remove
7. Specialized Wiring Harness for Hotbed Makes Sure NO Short Circuit.
8. Cable Carrier Chain for Superior Cable Management
9. 24V Power Supply for Better Heating and Motor Performance
10. Built-in Fuse to Prevent Current Overload
11. Latest Marlin2.0 Firmware, More powerful and GPL compliant.
12. Auto-Bed-Leveling + Z Offset, Even A Warped Bed Can be Easily Printed on
13. Thermal Runaway Protection
14. Filament Run Out Sensor
15. Resume Print

Visit the store


Temperature:
Operational Print Bed Temperature:<100 ordmC
Operational Extruder Temperature:<275ordmC
Ambient Operating Temperature: 8ordmC - 40ordmC

Software:
Input Formats:STL, OBJ, DAE, AMF
Slicer Software: Simplify3d,Cura,repetier.
Cura Output Formats: GCode
Connectivity: Secure Digital Memory Card/USB
Power Supply: 360W,110V-220V (Adjustable)

Specifications:
Size:450X420X710MM
Upgraded Package size:640*490*200MM

Color:black
Model:Ortur4-V2/Ortur4-V1
Positioning Accuracy: X/Y/Z 0.01mm
Supported Print Materials: PLA, ABS, HIPS, Wood
Normal Printing Speed: 50-150MM/S (Adjustable)
Nozzle Diameter: 0.4 mm
Extruder Quantity: Single
Build Size: 260*310*305MM

Visit the store

Specification
Package Size(L x W x H)
640*485*200MM
Package Weights
14.5KG
Package Contents
1x 3D Printer Kit 1x 16GB TF Card 1x SD Card reader 1x Filament (10m/ 200g/1kg)

Author Name

Contact Form

Name

Email *

Message *

Powered by Blogger.